Industrial Systems
Corzan™ Industrial Sheet / Lining
The superior corrosion resistance and high temperature performance of Corzan CPVC is available in 48” x 96” sheet. The excellent fire performance of Corzan CPVC will also be useful in many sheet applications. Sheet products are available in thicknesses ranging from 1/8” to 3,.” and are either extruded or compression molded. The ability to bend, shape, and weld sheet made from Corzan CPVC enables its use in a wide variety of process applications including tanks, scrubbers, and ventilation systems. Recommendations for fabricating equipment using sheet are covered in the Fabrication section of the design manual. Sheet made from Corzan CPVC can readily be overwrapped with Fiber Reinforced Polyester (FRP), if necessary, and will not require fabric-backing to achieve proper adhesion between the CPVC and FRP. Refer to the Product Availability section of the design manual for information on where to obtain sheet made from Corzan CPVC.
Basic Physical Properties
| Property | Test | Condition | English Units | SI Units |
| GENERAL | ||||
| Density (Grey, Specific Gravity = 1.47) | ASTM D792 | 73°F/23°C | 91.7 lb/ft3 | 1.47 g/cm3 |
| Density (4910 & 4910G2, SG = 1.55) | ASTM D792 | 73°F/23°C | 96.7 lb/ft3 | 1.55 g/cm3 |
| Specific Volume (Grey) | 73°F/23°C | 0.0109 ft3/lb | 0.680 cm3/g | |
| Specific Volume (4910 & 4910G2) | 73°F/23°C | 0.0103 ft3/lb | 0.645 cm3/g | |
| Water Absorption | ASTM D570 | 73°F/23°C |
+0.03% |
+0.03% |
| Rockwell Hardness | ASTM D785 | 73°F/23°C | 115 | |
| Cell Class (Grey) | ASTM D1784 | 24436 | ||
| MECHANICAL | ||||
| *Notched Izod Impact (Grey) | ASTM D256 | 73°F/23°C | 9.0 ft lbf/in | 480 J/m |
| *Notched Izod Impact (4910) | ASTM D256 | 73°F/23°C | 2.2 ft lbf/in | 115 J/m |
| *Notched Izod Impact (4910G2) | ASTM D256 | 73°F/23°C | 3.3 ft lbf/in | 185 J/m |
| *Tensile Strength (Grey) | ASTM D638 | 73°F/23°C | 7300 psi | 50 N/mm2 |
| *Tensile Strength (4910) | ASTM D638 | 73°F/23°C | 7500 psi | 52 N/mm2 |
| *Tensile Strength (4910G2) | ASTM D638 | 73°F/23°C | 6540 psi | 48 N/mm2 |
| *Tensile Modulus (Grey) | ASTM D638 | 73°F/23°C | 350,000 psi | 2400 N/mm2 |
| *Tensile Modulus (4910) | ASTM D638 | 73°F/23°C | 350,000 psi | 2400 N/mm2 |
| *Tensile Modulus (4910G2) | ASTM D638 | 73°F/23°C | 400,000 psi | 3100 N/mm2 |
| *Flexural Strength (Grey) | ASTM D790 | 73°F/23°C | 14,300 psi | 100 N/mm2 |
| *Flexural Strength (4910) | ASTM D790 | 73°F/23°C | 13,500 psi | 93 N/mm2 |
| *Flexural Strength (4910G2) | ASTM D790 | 73°F/23°C | 11,000 psi | 80 N/mm2 |
| *Flexural Modulus (Grey) | ASTM D790 | 73°F/23°C | 361,000 psi | 2490 N/mm2 |
| *Flexural Modulus (4910) | ASTM D790 | 73°F/23°C | 408,000 psi | 2810 N/mm2 |
| *Flexural Modulus (4910G2) | ASTM D790 | 73°F/23°C | 370,000 psi | 2690 N/mm2 |
| Compressive Strength (Grey) | ASTM D695 | 73°F/23°C | 9700 psi | 67 N/mm2 |
| Compressive Strength (4910) | ASTM D695 | 73°F/23°C | 10,200 psi | 70 N/mm2 |
| Compressive Strength (4910G2) | ASTM D695 | 73°F/23°C | 9860 psi | 68 N/mm2 |
| Compressive Modulus (Grey) | ASTM D695 | 73°F/23°C | 198,000 psi | 1365 N/mm2 |
| Compressive Modulus (4910) | ASTM D695 | 73°F/23°C | 199,000 psi | 1370 N/mm2 |
| Compressive Modulus (4910G2) | ASTM D695 | 73°F/23°C | 188,000 psi | 1295 N/mm2 |
| THERMAL | ||||
| Coefficient of Thermal Expansion | ASTM D696 | 3.8 x10-5in/in/°F | 2.1 x 10-5 m/m/K | |
| Thermal Conductivity | ASTM C177 | 0.95 BTU in/hr/ft2/°F | 0.137 W/m/K | |
| Heat Distortion Temperature (Grey) | ASTM D648 | 198°F | 92°C | |
| Heat Distortion Temperature (4910) | ASTM D649 | 205°F | 96°C | |
| Heat Distortion Temperature (4910G2) | ASTM D650 | 169°F | 79°C | |
| *Specific Heat (Heat Capacity/mass) | DSC | 73°F/23°C 212°F/100°C |
0.21 BTU/lbm°F |
0.88 J/gK 1.09 J/gK |
| FLAMMABILITY | ||||
| Flammability Rating | UL 94 | V-0 | ||
| Flame Spread (Grey) | ASTM E84 | 0.145"/1"/2" | 20/20/20 | |
| Smoke Developed (Grey) | ASTM E84 | 0.145"/1"/2" | 760/550/530 | |
| Limiting Oxygen Index | ASTM D2863 | 60% | ||
| ELECTRICAL | ||||
| Dielectric Strength | ASTM D149 | 1250 V/mil | 492,000 V/cm | |
| Dielectric Constant | ASTM D150 | 60 Hz, 30°F/-1°C | 3.70 | 3.70 |
| Power Factor | ASTM D150 | 1000 Hz | 0.007% | 0.007% |
| Volume Resistivity | ASTM D257 | 73°F/23°C | 3.4x1015ohm-cm | |
| *Plots of these properties versus temperature follow this table. Data presented are typical values. |
||||
